Find The Manual

Your Missing User Manual

Black+Decker BDEMS600 Mouse Sander User Manual

Home > Black+Decker > Sander

Download Manual: BDEMS600.pdf

This manual, entitled BDEMS600, is 5,183,870 bytes (5.2 MB) and has mime type of application/pdf.

final page size: 8.5 x 5.5 in
Please read before returning this product for any reason.
àLIRE avant de retourner ce produit pour quelque raison que ce soit.
LEA EL MANUAL antes de devolver este producto por cualquier motivo.
INSTRUCTION MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES
MOUSE SANDER
MOUSE PONCEUSE-POLISSEUSE
DE LIJARDORA MOUSE
BDEMS600
ENGLISH
English (original instructions) 1
Français (traduction de la notice d’instructions originale) 8
Español (traducido de las instrucciones originales) 16
To register your new product, visit
www.BlackandDecker.com/NewOwner
Consulter le site Web www.BlackandDecker.com/NewOwner
pour enregistrer votre nouveau produit.
Visite www.BlackandDecker.com/NewOwner para registrar su
nuevo producto.
Thank you for choosing BLACK+DECKER!
If you have a question or experience a problem with your
BLACK+DECKER purchase, go to:
http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. – Fri. to speak
with an agent.
Please have the CATALOG NUMBER available when you call.
ENGLISH
1
English (original instructions)
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
WARNING: To reduce the risk of injury, read the
instructionmanual.
1
On/off switch
2
Back handle
3
Front handle
4
Dust collection canister
5
Sanding pad
6
Removable pad tip
7
Finger attachment
Fig. A
13
6 5 4
2
7
ENGLISH
2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
seriousinjury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
powertool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas inviteaccidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust orfumes.
c ) Keep children and bystanders away while
operating a power tool. Distractions can cause you
to losecontrol.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electricshock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed orgrounded.
c ) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electricshock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electricshock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electricshock.
f ) If operating a power tool in a damp location
is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electricshock.
3) Personal Safety
a ) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personalinjury.
b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personalinjuries.
c ) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energizing power tools that
have the switch on invitesaccidents.
d ) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personalinjury.
e ) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpectedsituations.
f ) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or
long hair can be caught in movingparts.
g ) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-relatedhazards.
4) Power Tool Use and Care
a ) Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it wasdesigned.
b ) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
berepaired.
c ) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power
toolaccidentally.
d ) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrainedusers.
e ) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained powertools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier tocontrol.
g ) Use the power tool, accessories and tool bits, etc.
in accordance with these instructions, taking
ENGLISH
3
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardoussituation.
5) Service
a ) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool ismaintained.
SAFETY WARNINGS AND INSTRUCTIONS:
SANDERS
ALWAYS WEAR EYE PROTECTION.
Clean your tool out periodically.
CAUTION: Wear appropriate hearing protection
during use. Under some conditions and duration of
use, noise from this product may contribute to hearing
loss.
OTHER IMPORTANT SAFETY WARNINGS
AND INSTRUCTIONS
Sanding Lead based Paint
Sanding of lead based paint is NOT RECOMMENDED due
to the difficulty of controlling the contaminated dust.
The greatest danger of lead poisoning is to children and
pregnant women.
Since it is difficult to identify whether or not a paint contains
lead without a chemical analysis, we recommend the
following precautions when sanding any paint:
PERSONAL SAFETY
No children or pregnant women should enter the work
area where the paint sanding is being done until all
clean up is completed.
A dust mask or respirator should be worn by all persons
entering the work area. The filter should be replaced
daily or whenever the wearer has difficulty breathing.
NOTE: Only those dust masks suitable for working with lead
paint dust and fumes should be used. Ordinary painting
masks do not offer this protection. See your local hardware
dealer for the proper (NIOSH approved) mask.
NO EATING, DRINKING or SMOKING should be done in
the work area to prevent ingesting contaminated paint
particles. Workers should wash and clean up BEFORE
eating, drinking or smoking. Articles of food, drink, or
smoking should not be left in the work area where dust
would settle on them.
ENVIRONMENTAL SAFETY
Paint should be removed in such a manner as to
minimize the amount of dust generated.
Areas where paint removal is occurring should be sealed
with plastic sheeting of 4 mils thickness.
Sanding should be done in a manner to reduce tracking
of paint dust outside the work area.
CLEANING AND DISPOSAL
All surfaces in the work area should be vacuumed
and thoroughly cleaned daily for the duration of the
sanding project. Vacuum filter bags should be changed
frequently.
Plastic drop cloths should be gathered up and disposed
of along with any dust chips or other removal debris.
They should be placed in sealed refuse receptacles and
disposed of through regular trash pick-up procedures.
During clean up, children and pregnant women should
be kept away from the immediate work area.
All toys, washable furniture and utensils used by
children should be washed thoroughly before being
used again.
SAVE THESE INSTRUCTIONS
Additional Safety Information
WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETYEQUIPMENT:
ANSI Z87.1 eye protection (CAN/CSA Z94.3),
ANSI S12.6 (S3.19) hearing protection,
NIOSH/OSHA/MSHA respiratoryprotection.
WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to the State
of California to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicalsare:
lead from lead-based paints,
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-
treatedlumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopicparticles.
Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing
dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmfulchemicals.
WARNING: Use of this tool can generate and/
or disperse dust, which may cause serious and
permanent respiratory or other injury. Always use
NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles
away from face andbody.
WARNING: Always wear proper personal hearing
protection that conforms to ANSI S12.6 (S3.19)
during use. Under some conditions and duration
of use, noise from this product may contribute to
hearingloss.
ENGLISH
4
CAUTION: When not in use, place tool on its side
on a stable surface where it will not cause a
tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery pack
but may be easily knockedover.
Air vents often cover moving parts and should be
avoided. Loose clothes, jewelry or long hair can be
caught in movingparts.
An extension cord must have adequate wire size
(AWG or American Wire Gauge) for safety. The smaller
the gauge number of the wire, the greater the capacity
of the cable, that is, 16 gauge has more capacity than 18
gauge. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. When using
more than one extension to make up the total length,
be sure each individual extension contains at least the
minimum wire size. The following table shows the correct
size to use depending on cord length and nameplate
ampere rating. If in doubt, use the next heavier gauge. The
lower the gauge number, the heavier thecord.
Minimum Gauge for Cord Sets
Volts
Total Length of Cord in Feet
(meters)
120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)
240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)
Ampere Rating
American Wire Gauge
More
Than
Not
More
Than
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
The label on your tool may include the following symbols. The
symbols and their definitions are asfollows:
V ......................... volts
Hz .......................hertz
min ..................... minutes
or DC ......direct current
...................... Class I Construction
(grounded)
…/min ..............per minute
BPM .................... beats per minute
IPM ..................... impacts per minute
RPM .................... revolutions per
minute
sfpm ................... surface feet per
minute
SPM .................... strokes per minute
A ......................... amperes
W ........................watts
or AC ...........alternating current
or AC/DC .... alternating or
direct current
...................... Class II
Construction
(double insulated)
n
o
.......................no load speed
n .........................rated speed
......................earthing terminal
.....................safety alert symbol
.....................visible radiation
..................... wear respiratory
protection
..................... wear eye
protection
..................... wear hearing
protection
..................... read all
documentation
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
Motor
Be sure your power supply agrees with the nameplate
marking. Voltage decrease of more than 10% will cause loss
of power and overheating.
DeWALT tools are factory tested;
if this tool does not operate, check power supply.
COMPONENTS (FIG. A)
WARNING: Never modify the power tool or any part
of it. Damage or personal injury couldresult.
Refer to Figure A at the beginning of this manual for a
complete list ofcomponents.
INTENDED USE
Your BLACK+DECKER random orbital sander has been
designed for sanding wood, metal, plastics and painted
surfaces. This product is intended for household, consumer
useonly.
DO NOT use under wet conditions or in presence of
flammable liquids orgases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
thistool.
OPERATION
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can causeinjury.
WARNING:To reduce the risk of serious personal
injury, read and follow all important safety warnings
and instructions prior to using this tool.
Proper Hand Position (Fig. B)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury,
ALWAYS hold securely in anticipation of a sudden
reaction.
Proper hand position requires one hand on the main handle
3
as shown in Fig. B.
Fig. B
3
ENGLISH
5
Switch (Fig. C, C1)
To turn the tool ON, hold it as shown in Figure C or C1 and
push the on/off switch
1
toward the front of the tool. To
turn the tool OFF, pull the on/off switch back toward the
cord.
Fig. C
Fig. C1
1
Operation
Grasp product as shown in Fig. C or C1 and turn it on. NOTE:
Do not rest fingers on platen during use. Move it in long
sweeping strokes across the surface, letting it do the work.
Light pressure is all that is required for sanding, polishing or
scrubbing. Excessive pressure will slow the tool and produce
inferior results. Check your work often, product is capable of
removing material rapidly.
WARNING: Shock hazard. Under no circumstances
should this product be used near water.
CAUTION: To reduce the risk of injury, turn off and
unplug the tool before making any adjustments or
removing or installing attachments or accessories.
Detail Sanding
Your tool is equipped with a teardrop base which allows
you to use it on large flat surfaces and tight spots or corners.
The pad tips may wear unevenly, depending on use.
Fitting sanding sheets (Fig. D)
1. Hold the tool with the sanding pad
5
facing upward.
2. Place the sanding sheet onto the sanding base, ensuring
all the holes of the paper line up with the holes in the
sanding pad as shown in Fig. D.
Fig. D
5
Finger Attachment (Fig. E)
The finger attachment is used for fine detail sanding.
1. Remove the screw.
2. Remove the diamond-shaped pad tip
6
from the base.
3. Fit the finger attachment onto the sanding base as
shown in Fig. E.
4. Fit and tighten the screw.
5. Align the proper sanding sheet with the finger
7
attachment.
Fig. E
6
Dust Extraction (Fig. F)
To Empty Dust Canister:
CAUTION: Respiratory hazard. Never operate this tool
for wood sanding unless the dust canister is in place.
Sanding dust exhaust may create a breathing hazard.
WARNING: Fire hazard. Collected sanding dust from
sanding surface coatings (polyurethane, linseed
oil, etc.) can self-ignite in sander dust canister or
elsewhere and cause fire. To reduce risk, empty
canister frequently and strictly follow sander manual
and coating manufacturer’s instructions.
WARNING: Fire hazard. When working on metal
surfaces, do not use the dust canister or a vacuum
cleaner because sparks are generated. Wear safety
glasses and a dust mask. Due to the danger of fire, do
not use your sander to sand magnesium surfaces. Do
not use for wet sanding.
The dust collection canister
4
should be emptied after every
10 minutes of sanding.
1. While holding the sander, grasp the dust collection
canister and pull it off of the sander as shown in Fig. F.
2. Hold the canister just inside a garbage can to ensure
dust is contained.
3. Push up on tab
8
to separate the top of the canister
from the bottom as shown in Fig. F.
Fig. F
8
4
4. Gently shake or tap the top and bottom of the canister
to empty.
ENGLISH
6
5. Reattach the top and bottom and firmly push the canister
back onto the sander.
Hints for optimum use (Fig. G)
Do not place your hands over the ventilation slots.
Do not exert too much pressure on the tool.
Regularly check the condition of the sanding sheet.
Replace when necessary.
Always sand with the grain of the wood.
When sanding new layers of paint before applying
another layer, use extra fine grit.
On very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually change to a fine
grit for a smooth finish.
When sanding on a vertical surface, hold the back handle
2
for better grip and control as shown in Fig. G.
Fig. G
2
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can causeinjury.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performingthis.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into aliquid.
Repairs
The charger and battery pack are notserviceable.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a BLACK+DECKER factory service
center or a BLACK+DECKER authorized service center.
Always use identical replacementparts.
Register Online
Thank you for your purchase. Register your product nowfor:
WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with yourproduct.
CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
ofpurchase.
FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
SafetyAct.
Register online at www.blackanddecker.com/register.
ACCESSORIES
A variety of Mouse
®
accessories are available at extra cost.
Listings per retailer may vary. Note: Use only sandpaper
with holes in the same configuration as on the base of the
sander. Sandpaper without holes will not allow dust to enter
the canister.
The hook and loop pad and individual bases are replaceable
parts. If they become worn, contact your local service
center. For more information call: 1-800-544-6986.
WARNING: The use of any accessory not
recommended for use with this appliance could
behazardous.
APPLICATION / ACCESSORY MATRIX
ACCESSORY RECOMMENDED
APPLICATIONS / USES
Medium grit sandpaper
Fine grit sandpaper
Extra fine grit sandpaper
Detail sanding tips
1 OT polishing / stripping wool
4 OT fine polishing wool
Grey foam pad
White non-woven pad
Red non-woven pad
Paint, varnish, rust removal
Surface blending and finishing
Sanding between coats of paint
or varnish
Corners / hard to reach places
Polishing metals / stripping
varnish or urethane
Fine polishing, satin finish on
paint / varnish / urethane
Applying and removing polish
Light scrubbing
Heavy scrubbing / rust removal
The pads described above may be available in kits where
Mouse® products are sold. For more information call
1-800-544-6986.
ENGLISH
7
SERVICE INFORMATION
All
BLACK+DECKER
Service Centers are staffed
with trained personnel to provide customers with
efficient and reliable power tool service. Whether
you need technical advice, repair, or genuine factory
replacement parts, contact the
BLACK+DECKER
location nearest you. To find your local service
location, call: 1-800-544-6986 or visit
www.blackanddecker.com
TWO-YEAR LIMITED WARRANTY
BLACK+DECKER
warrants this product to be free from defects in
material or workmanship for a period of two
2
years following
the date of purchase, provided that the product is used in a
home environment. This limited warranty does not cover failures
due to abuse, accidental damage or when repairs have been
made or attempted by anyone other than
BLACK+DECKER
and
its Authorized Service Centers. A defective product meeting the
guarantee conditions set forth herein will be replaced or repaired
at no charge in either of two ways:
The first, which will result in exchanges only, is to return the
product to the retailer from whom it was purchased (provided
that the store is a participating retailer).Returns should be made
within the time period of the retailer’s policy for exchanges.
Proof of purchase may be required. Please check with the
retailer for its specific return policy regarding time limits for
returns or exchanges. The second option is to take or send the
product (prepaid) to a BLACK+DECKER owned or authorized
Service Center for repair or replacement at BLACK+DECKER’s
option. Proof of purchase may be required. BLACK+DECKER
owned and authorized service centers are listed online at www.
blackanddecker.com.
This warranty does not apply to accessories. This warranty
gives you specific legal rights and you may have other rights
which vary from state to state or province to province. Should
you have any questions, contact the manager of your nearest
BLACK+DECKER Service Center. This product is not intended for
commercial use, and accordingly, such commercial use of this
product will void this warranty. All other warranties, express or
implied, are herebydisclaimed.
LATIN AMERICA: This warranty does not apply to
products sold in Latin America. For products sold in Latin
America, check country specific warranty information
contained in the packaging, call the local company or see
the website for suchinformation.
FREE WARNING LABEL REPLACEMENT:
If your
warning labels become illegible or are missing, call 1-800-544-
6986 for a freereplacement.
Imported by Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
1-800-544-6986
Troubleshooting Guide
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Unit will not start. Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped.
Cord or switch is damaged.
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly
causes the circuit fuse to blow, discontinue
use immediately and have it serviced at a
BLACK+DECKER service center or authorized
servicer.)
Reset circuit breaker. (If the product repeatedly
causes the circuit breaker to trip, discontinue
use immediately and have it serviced at a
BLACK+DECKER service center or authorized
servicer.)
Have cord or switch replaced at BLACK+DECKER
Service Center or Authorized Servicer.
Dust is not being collected. Sandpaper holes do not align.
Dust canister is full.
Use Mouse
®
sandpaper with the appropriate hole
configuration.
Separate dust canister and gently shake or tap
to empty.
FRANÇAIS
8
Définitions : symboles et termes d'alarmes sécurité
Ces guides d'utilisation utilisent les symboles et termes d'alarmes sécurité suivants pour vous prévenir de situations
dangereuses et de risques de dommages corporels ou matériels.
DANGER: indique une situation dangereuse imminente qui, si elle n’est pas évitée, entraînera la mort ou des
blessuresgraves.
AVERTISSEMENT: indique une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner la
mort ou des blessuresgraves.
ATTENTION: indique une situation potentiellement dangereuse qui, si elle n’est pas évitée, pourrait entraîner des
blessures légères oumodérées.
(Si utilisé sans aucun terme) Indique un message propre à la sécurité.
AVIS : indique une pratique ne posant aucun risque de dommages corporels mais qui par contre, si rien n’est fait
pour l’éviter, pourrait poser des risques de dommages matériels.
AVERTISSEMENT! lire tous les avertissements de
sécurité et toutes les directives. Le non-respect
des avertissements et des directives pourrait se
solder par un choc électrique, un incendie et/ou une
blessuregrave.
AVERTISSEMENT : afin de réduire le risque de
blessures, lire le mode d’emploi del’outil.
Pour toute question ou remarque au sujet de cet outil
ou de tout autre outil BLACK+DECKER, composez le
numéro sans frais : 1–800–4-BLACK+DECKER((888)
848-5175).
1
Interrupteur marche/arrêt
2
Poignée arrière
3
Poignée avant
4
Compartiment à poussière
5
Patin de ponçage
6
Pointe amovible du patin de ponçage
7
Accessoire en forme de doigt
Français (traduction de la notice d’instructions originale)
Fig. A
13
6 5 4
2
7
FRANÇAIS
9
AVERTISSEMENTS DE SÉCURITÉ GÉNÉRAUX
POUR LES OUTILS ÉLECTRIQUES
AVERTISSEMENT! lire tous les avertissements de
sécurité et toutes les directives. Le non-respect
des avertissements et des directives pourrait se
solder par un choc électrique, un incendie et/ou une
blessuregrave.
CONSERVER TOUS LES
AVERTISSEMENTS ET TOUTES
LES DIRECTIVES POUR UN USAGE
ULTÉRIEUR
Le terme « outil électrique » cité dans les avertissements se
rapporte à votre outil électrique à alimentation sur secteur
(avec fil) ou par piles (sans fil).
1) Sécurité du lieu de travail
a ) Tenir l’aire de travail propre et bien éclairée.
Les lieux encombrés ou sombres sont propices
auxaccidents.
b ) Ne pas faire fonctionner d’outils électriques
dans un milieu déflagrant, tel qu’en présence de
liquides, de gaz ou de poussières inflammables.
Les outils électriques produisent des étincelles qui
pourraient enflammer la poussière ou lesvapeurs.
c ) Éloigner les enfants et les personnes à proximité
pendant l’utilisation d’un outil électrique. Une
distraction pourrait en faire perdre la maîtrise à
l’utilisateur.
2) Sécurité en matière d’électricité
a ) Les fiches des outils électriques doivent
correspondre à la prise. Ne jamais modifier la
fiche d’aucune façon. Ne jamais utiliser de fiche
d’adaptation avec un outil électrique mis à la
terre. Le risque de choc électrique sera réduit par
l’utilisation de fiches non modifiées correspondant à
laprise.
b ) Éviter tout contact physique avec des surfaces
mises à la terre comme des tuyaux, des
radiateurs, des cuisinières et des réfrigérateurs.
Le risque de choc électrique est plus élevé si votre corps
est mis à laterre.
c ) Ne pas exposer les outils électriques à la pluie ou
à l’humidité. La pénétration de l’eau dans un outil
électrique augmente le risque de chocélectrique.
d ) Ne pas utiliser le cordon de façon abusive.
Ne jamais utiliser le cordon pour transporter,
tirer ou débrancher un outil électrique. Tenir le
cordon éloigné de la chaleur, de l’huile, des bords
tranchants et des pièces mobiles. Les cordons
endommagés ou enchevêtrés augmentent les risques
de chocélectrique.
e ) Pour l’utilisation d’un outil électrique à
l’extérieur, se servir d’une rallonge convenant à
cette application. L’utilisation d’une rallonge conçue
pour l’extérieur réduira les risques de chocélectrique.
f ) S’il est impossible d’éviter l’utilisation d’un
outil électrique dans un endroit humide,
brancher l’outil dans une prise ou sur un circuit
d’alimentation dotés d’un disjoncteur de fuite à
la terre (GFCI). L’utilisation de ce type de disjoncteur
réduit les risques de chocélectrique.
3) Sécurité personnelle
a ) Être vigilant, surveiller le travail effectué et faire
preuve de jugement lorsqu’un outil électrique
est utilisé. Ne pas utiliser d’outil électrique en
cas de fatigue ou sous l’influence de drogues,
d’alcool ou de médicaments. Un simple moment
d’inattention en utilisant un outil électrique peut
entraîner des blessures corporellesgraves.
b ) Utiliser des équipements de protection
individuelle. Toujours porter une protection
oculaire. L’utilisation d’équipements de protection
comme un masque antipoussière, des chaussures
antidérapantes, un casque de sécurité ou des
protecteurs auditifs lorsque la situation le requiert
réduira les risques de blessurescorporelles.
c ) Empêcher les démarrages intempestifs. S’assurer
que l’interrupteur se trouve à la position
d’arrêt avant de relier l’outil à une source
d’alimentation et/ou d’insérer un bloc-piles, de
ramasser ou de transporter l’outil. Transporter
un outil électrique alors que le doigt repose sur
l’interrupteur ou brancher un outil électrique dont
l’interrupteur est à la position de marche risque de
provoquer unaccident.
d ) Retirer toute clé de réglage ou clé avant de
démarrer l’outil. Une clé ou une clé de réglage
attachée à une partie pivotante de l’outil électrique
peut provoquer des blessurescorporelles.
e ) Ne pas trop tendre les bras. Conserver
son équilibre en tout temps. Cela permet
de mieux maîtriser l’outil électrique dans les
situationsimprévues.
f ) S’habiller de manière appropriée. Ne pas porter
de vêtements amples ni de bijoux. Garder les
cheveux, les vêtements et les gants à l’écart des
pièces mobiles. Les vêtements amples, les bijoux ou
les cheveux longs risquent de rester coincés dans les
piècesmobiles.
g ) Si des composants sont fournis pour le
raccordement de dispositifs de dépoussiérage
et de ramassage, s’assurer que ceux-ci sont bien
raccordés et utilisés. L’utilisation d’un dispositif de
dépoussiérage peut réduire les dangers engendrés par
lespoussières.
4) Utilisation et entretien d’un outil
électrique
a ) Ne pas forcer un outil électrique. Utiliser l’outil
électrique approprié à l’application. L’outil
électrique approprié effectuera un meilleur travail,
de façon plus sûre et à la vitesse pour laquelle il a
étéconçu.
FRANÇAIS
10
b ) Ne pas utiliser un outil électrique dont
l’interrupteur est défectueux. Tout outil électrique
dont l’interrupteur est défectueux est dangereux et
doit êtreréparé.
c ) Débrancher la fiche de la source d’alimentation
et/ou du bloc-piles de l’outil électrique avant de
faire tout réglage ou changement d’accessoire
ou avant de ranger l’outil. Ces mesures préventives
réduisent les risques de démarrage accidentel de
l’outilélectrique.
d ) Ranger les outils électriques hors de la portée
des enfants et ne permettre à aucune personne
n’étant pas familière avec un outil électrique ou
son mode d’emploi d’utiliser cet outil. Les outils
électriques deviennent dangereux entre les mains
d’utilisateursinexpérimentés.
e ) Entretien des outils électriques. Vérifier si les
pièces mobiles sont mal alignées ou coincées,
si des pièces sont brisées ou présentent toute
autre condition susceptible de nuire au bon
fonctionnement de l’outil électrique. En cas de
dommage, faire réparer l’outil électrique avant
toute nouvelle utilisation. Beaucoup d’accidents
sont causés par des outils électriques malentretenus.
f ) S’assurer que les outils de coupe sont aiguisés et
propres. Les outils de coupe bien entretenus et affûtés
sont moins susceptibles de se coincer et sont plus
faciles àmaîtriser.
g ) Utiliser l’outil électrique, les accessoires, les
forets, etc. conformément aux présentes
directives en tenant compte des conditions de
travail et du travail à effectuer. L’utilisation d’un
outil électrique pour toute opération autre que celle
pour laquelle il a été conçu estdangereuse.
5) Réparation
a ) Faire réparer l’outil électrique par un réparateur
professionnel en n’utilisant que des pièces de
rechange identiques. Cela permettra de maintenir
une utilisation sécuritaire de l’outilélectrique.
DIRECTIVES ET CONSIGNES DE SÉCURITÉ :
PONCEUSES
PORTER SYSTÉMATIQUEMENT UNE PROTECTION
OCULAIRE.
Nettoyer périodiquement votre outil.
AUTRES DIRECTIVES ET CONSIGNES DE
SÉCURITÉ IMPORTANTES
Ponçage des peintures à base de plomb
Le ponçage des peintures à base de plomb N’EST PAS
RECOMMANDÉ, car il est difficile de se protéger contre les
poussières contaminées. Lempoisonnement au plomb
présente le plus grand danger pour les enfants et les
femmes enceintes.
Comme il est difficile d’identifier si la peinture contient ou
non du plomb sans effectuer une analyse chimique, nous
vous recommandons de prendre les précautions suivantes
lors du ponçage de toutes les peintures.
PROTECTION DE L’INDIVIDU
Aucun enfant ou femme enceinte ne devrait pénétrer
sur les lieux de travail lors du ponçage et tant que ces
lieux n’auront pas été nettoyés complètement.
Toute personne entrant dans la zone de travail devrait
porter un masque antipoussières ou un dispositif
de protection des voies respiratoires. Le filtre doit en
être remplacé quotidiennement ou chaque fois que
l’utilisateur commence à avoir des difficultés à respirer.
REMARQUE: utiliser exclusivement une protection des
voies respiratoires adéquate pour le travail sur les peintures
au plomb produisant poussières ou émanations. Les
masques ordinaires noffrent pas ce niveau de protection. Se
renseigner auprès de son quincaillier local pour obtenir une
liste de masques antipoussières (agréés par NIOSH).
NE PAS MANGER, BOIRE OU FUMER sur les lieux de
travail pour prévenir l’ingestion de particules de peinture
contaminées. Il est recommandé aux ouvriers de se laver
et changer AVANT de manger, boire ou fumer. Ne pas
laisser sur les lieux de travail, là où la poussière pourrait
s’y déposer, nourriture, boisson, cigarette ou autre
produit de consommation.
PROTECTION DE L’ENVIRONNEMENT
La peinture devrait être retirée de façon à minimiser la
quantité de poussières générées.
Les lieux où la peinture est retirée devraient être isolés
avec des panneaux de plastique de 4mils d’épaisseur.
Le ponçage devrait être effectué de manière à réduire
toute propagation des poussières de peinture hors des
lieux de travail.
NETTOYAGE ET ÉLIMINATION
Passer quotidiennement l’aspirateur sur les lieux de
travail et les nettoyer soigneusement pendant toute la
durée du projet de ponçage. Changer fréquemment les
filtres d’aspirateur.
Recueillir toute toile de protection plastifiée utilisée
et s’en défaire avec toute particule de poussière ou
autre débris à éliminer. Les placer dans un contenant
hermétique pour déchets et les jeter conformément à la
procédure normale d’élimination des ordures. Pendant
le nettoyage, maintenir à distance de la zone immédiate
de travail les enfants ou les femmes enceintes.
Nettoyer soigneusement jouets, meubles lavables, et
tout ustensile utilisé par les enfants avant toute nouvelle
réutilisation.
CONSERVER CES DIRECTIVES
Consigne de sécurité supplémentaire
AVERTISSEMENT: porter SYSTEMATIQUEMENT
des lunettes de protection. Les lunettes courantes
NE sont PAS des lunettes de protection. Utiliser aussi
un masque antipoussières si la découpe doit en
produire beaucoup. PORTER SYSTÉMATIQUEMENT UN
ÉQUIPEMENT DE SÉCURITÉ HOMOLOGUÉ:
Protection oculaire ANSI Z87.1 (CAN/CSA Z94.3);
Protection auditive ANSI S12.6 (S3.19);
Protection des voies respiratoires NIOSH/OSHA/
MSHA.
FRANÇAIS
11
AVERTISSEMENT: les scies, meules, ponceuses,
perceuses ou autres outils de construction peuvent
produire des poussières contenant des produits
chimiques reconnus par l’État californien pour causer
cancers, malformations congénitales ou être nocifs au
système reproducteur. Parmi ces produits chimiques,
on retrouve:
Le plomb dans les peintures à base de plomb;
La silice cristallisée dans les briques et le ciment,
ou autres produits de maçonnerie; et
L’arsenic et le chrome dans le bois ayant subi un
traitementchimique.
Le risque associé à de telles expositions varie selon la
fréquence à laquelle on effectue ces travaux. Pour réduire
toute exposition à ces produits: travailler dans un endroit
bien aéré, en utilisant du matériel de sécurité homologué, tel
un masque antipoussières spécialement conçu pour filtrer les
particulesmicroscopiques.
Limiter toute exposition prolongée avec les
poussières provenant du ponçage, sciage, meulage,
perçage ou toute autre activité de construction.
Porter des vêtements de protection et nettoyer à
l’eau savonneuse les parties du corps exposées. Le
fait de laisser la poussière pénétrer dans la bouche, les
yeux ou la peau peut favoriser l’absorption de produits
chimiquesdangereux.
AVERTISSEMENT: cet outil peut produire et/
ou répandre de la poussière susceptible de causer
des dommages sérieux et permanents au système
respiratoire. Utiliser systématiquement un appareil
de protection des voies respiratoires homologué par
le NIOSH ou l’OSHA. Diriger les particules dans le sens
opposé au visage et aucorps.
AVERTISSEMENT: pendant l’utilisation, porter
systématiquement une protection auditive
individuelle adéquate homologuée ANSI S12.6
(S3.19). Sous certaines conditions et suivant la durée
d’utilisation, le bruit émanant de ce produit pourrait
contribuer à une perte de l’acuitéauditive.
ATTENTION: après utilisation, ranger l’outil
sur son côté, sur une surface stable, là où il
ne pourra ni faire trébucher ni faire chuter
quelqu’un. Certains outils équipés d’un large bloc-
piles peuvent tenir à la verticale sur celui-ci, mais
manquent alors destabilité.
Prendre des précautions à proximité des évents,
car ils cachent des pièces mobiles. Vêtements amples,
bijoux ou cheveux longs risquent de rester coincés dans
ces piècesmobiles.
Pour la sécurité de l’utilisateur, utiliser une rallonge
de calibre adéquat (AWG, American Wire Gauge
[calibrage américain normalisé des fils électriques]).
Plus le calibre est petit, et plus sa capacité est grande. Un
calibre16, par exemple, a une capacité supérieure à un
calibre18. L’usage d’une rallonge de calibre insuffisant
causera une chute de tension qui entraînera perte de
puissance et surchauffe. Si plus d’une rallonge est utilisée
pour obtenir une certaine longueur, s’assurer que chaque
rallonge présente au moins le calibre de fil minimum. Le
tableau ci-dessous illustre les calibres à utiliser selon la
longueur de rallonge et l’intensité nominale indiquée sur
la plaque signalétique. En cas de doute, utiliser le calibre
suivant. Plus le calibre est petit, plus la rallonge peut
supporter decourant.
Calibre minimum pour les cordons d'alimentation
Volts
Longueur totale du cordon
d'alimentation en mètre (pieds)
120 V 7,6 (25) 15,2 (50) 30,5 (100) 45,7 (150)
240 V 15,2 (50) 30,5 (100) 61,0 (200) 91,4 (300)
Ampères
AWG
Plus que Pas plus
que
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Non recommandé
L’étiquette apposée sur votre outil peut inclure les symboles
suivants. Les symboles et leur définition sont indiqués ci-après:
V ......................... volts
Hz ....................... hertz
min ..................... minutes
or DC ...... courant continu
...................... fabrication classe I
(mis à la terre)
…/min .............. par minute
BPM .................... battements par
minute
IPM ..................... impacts par minute
RPM .................... revolutions per
minute
sfpm ................... pieds linéaires par
minute (plpm)
SPM (FPM) ......... fréquence par
minute
A ......................... ampères
W ........................ watts
or AC ........... courant alternatif
or AC/DC .... courant alternatif
ou continu
...................... fabrication classe II
(double isolation)
n
o
....................... vitesse à vide
n ......................... vitesse nominale
...................... borne de terre
...................... symbole
d’avertissement
..................... radiation visible
..................... protection
respiratoire
.....................protection oculaire
.....................protection auditive
..................... lire toute la
documentation
CONSERVER CES CONSIGNES POUR
UTILISATION ULTÉRIEURE
Moteur
S’assurer que le bloc d’alimentation est compatible avec
l’inscription de la plaque signalétique.Une diminution de
tension de plus de 10 % provoquera une perte de puissance
et une surchauffe. Les outils DeWALT sont testés en usine; si
cet outil ne fonctionne pas, vérifier l’alimentation électrique.
DESCRIPTION (FIG. A)
AVERTISSEMENT: ne jamais modifier l’outil
électrique ni aucun de ses composants, car il y a
risques de dommages corporels oumatériels.
Reportez-vous en figureA au début de ce manuel pour
obtenir la liste complète descomposants.
USAGE PRÉVU
Votre ponceuse orbitale aléatoire Black + Decker a été
conçue pour le ponçage du bois, du métal, des plastiques et
des surfaces peintes. Ce produit est destiné uniquement à la
consommation domestique et à usage public.
NE PAS les utiliser en milieu ambiant humide ou en
présence de liquides ou de gazinflammables.
FRANÇAIS
12
NE PAS le laisser à la portée des enfants. Une supervision
est nécessaire auprès de tout utilisateur nonexpérimenté.
UTILISATION
AVERTISSEMENT: pour réduire le risque de
blessures graves, éteindre l’outil et retirer le
débrancher avant d’effectuer tout réglage
et d’enlever ou d’installer tout accessoire. Un
démarrage accidentel peut provoquer desblessures.
AVERTISSEMENT : afin de minimiser les risques de
blessures graves, lire, comprendre et respecter toutes
les mesures de sécurité et toutes les directives avant
d’utiliser l’outil.
Position correcte des mains (Fig. B)
AVERTISSEMENT: pour réduire tout risque
de dommages corporels graves, adopter
SYSTÉMATIQUEMENT la position des mains illustrée.
AVERTISSEMENT: pour réduire tout risque
de dommages corporels graves, maintenir
SYSTÉMATIQUEMENT l’outil fermement pour
anticiper toute réaction soudaine.
La position correcte des mains requiert une main sur la
poignée principale
3
comme le montre la Fig. B.
Fig. B
3
Détente (Fig. C, C1)
Pour mettre l’outil sous tension, le tenir comme le montre
la figure C ou C1, puis avancer l’interrupteur marche/arrêt
1
. Pour l’arrêter, reculer l’interrupteur marche/arrêt (en
direction du cordon).
Fig. C
Fig. C1
1
FONCTIONNEMENT
Saisir l’outil de la façon illustrée à la figure C ou C1 et le
mettre en marche. NOTE : Ne pas poser les doigts sur la
table porte-pièce en cours d’utilisation. Le déplacer en
longs mouvements de va-et-vient le long de la surface en le
laissant faire le travail. Il suffit d’exercer une légère pression
pour poncer, polir et frotter. Un excès de pression ralentit
l’outil et donne des résultats inférieurs. Surveiller souvent le
travail; l’outil peut enlever rapidement le matériau.
AVERTISSEMENT : risque de choc électrique. Ne
jamais utiliser ce produit près de l’eau.
MISE EN GARDE : pour réduire le risque de blessure,
éteindre et débrancher l’outil avant d’effectuer des
réglages ou de retirer ou d’installer des accessoires.
Ponçage de précision
l’outil est doté d’une base en forme de goutte qui permet
de l’utiliser autant sur de larges surfaces plates que dans des
recoins ou endroits difficiles d’accès.
Les pointes des bandes peuvent s’user inégalement, selon
l’usage qu’on en fait. Les bandes sont conçues de manière
à ce qu’on puisse substituer ou faire pivoter la pointe en
forme de losange.
Fixation des feuilles de papier abrasif
(Fig. D)
1. Tenir l’outil de manière à ce que le patin de ponçage
5
soit vers le haut.
2. Placer la feuille de papier abrasif sur la base de ponçage
en s’assurant que tous les trous du papier sont alignés
avec les trous dans le patin de ponçage comme le
montre la Fig. D.
Fig. D
5
Accessoire en forme de doigt (Fig. E)
L’accessoire en forme de doigt est utilisé pour le ponçage
de détails de pièces.
1. Enlever la vis.
2. Enlever la pointe de patin en forme de losange
6
de la
base de ponçage.
3. Fixer l’accessoire en forme de doigt sur la base de
ponçage comme le montre la Fig. E.
4. Poser et serrer la vis.
5. Aligner le papier abrasif approprié sur l’accessoire en
forme de doigt
7
.
FRANÇAIS
13
Fig. E
6
Compartiment à poussière (Fig. F)
Vidange du compartiment :
MISE EN GARDE : danger pour les voies respiratoires.
Ne jamais utiliser cet outil pour le ponçage du bois
sans le compartiment à poussière en position. La
poussière produite et éjectée par le ponçage risque de
provoquer des problèmes respiratoires.
AVERTISSEMENT : risque d’incendie. Les poussières
de ponçage issues des couches de protection
(polyuréthanne, huile de lin, etc.) peuvent s’enflammer
spontanément dans le compartiment à poussière ou
ailleurs et causer un incendie. Pour réduire les risques,
vider fréquemment le compartiment à poussière et
suivre strictement le mode d’emploi de la ponceuse
ainsi que les directives du fabricant de l’enduit.
AVERTISSEMENT : risque d’incendie. Pour le travail
effectué sur des surfaces métalliques, ne pas utiliser
le compartiment à poussière parce que des étincelles
sont produites. Porter des lunettes de sécurité et
un masque anti-poussières. En raison du risque
d’incendie, ne pas utiliser la ponceuse pour poncer des
surfaces de magnésium. Ne pas utiliser pour ponçage
à l’eau.
Vider le compartiment à poussière
4
toutes les 10 minutes
d’utilisation.
1. Tenir la ponceuse, saisir le compartiment à poussière et
tirer pour le détacher de la ponceuse, comme le montre
la Fig. F.
2. Tenir le compartiment dans le haut de la poubelle pour
que la poussière ne se disperse pas.
3. Appuyer vers le haut sur les pattes
8
pour séparer le
haut et le bas du compartiment, comme le montre la
Fig. F.
Fig. F
8
4
4. Secouer ou tapoter délicatement le haut ou le bas du
compartiment pour le vider par l’ouverture.
5. Rattacher le haut et le bas et enfoncer fermement le
compartiment dans la ponceuse.
Conseils pour optimiser l’utilisation
(Fig. G)
Ne pas mettre les mains sur les fentes d’évent.
Ne pas appliquer trop de pression sur l’outil.
Vérifier régulièrement l’état de la feuille de papier
abrasif. La remplacer au besoin.
Toujours poncer dans le sens du grain de bois.
Pour le ponçage de nouvelles couches de peinture
avant d’appliquer une autre couche, utiliser un grain
extra fin.
Sur des surfaces très inégales, ou pour enlever des
couches de peinture, commencer avec un grain grossier.
Sur d’autres surfaces, commencer par un grain moyen.
Dans les deux cas, passer graduellement à un grain fin
pour un fini lisse.
Lors du ponçage d’une surface verticale, tenir la poignée
arrière
2
pour bien maîtriser l’outil, comme le montre
la Fig. G.
Fig. G
2
MAINTENANCE
AVERTISSEMENT: pour réduire le risque de
blessures graves, éteindre l’outil et retirer le
débrancher avant d’effectuer tout réglage
et d’enlever ou d’installer tout accessoire. Un
démarrage accidentel peut provoquer desblessures.
Nettoyage
AVERTISSEMENT : enlever les saletés et la poussière
hors des évents au moyen d’air comprimé propre et
sec, au moins une fois par semaine. Pour minimiser
le risque de blessure aux yeux, toujours porter une
protection oculaire conforme à la norme ANSI Z87.1
lors dunettoyage.
AVERTISSEMENT : ne jamais utiliser de solvants ni
d’autres produits chimiques puissants pour nettoyer
les pièces non métalliques de l’outil. Ces produits
chimiques peuvent affaiblir les matériaux de plastique
utilisés dans ces pièces. Utiliser un chiffon humecté
uniquement d’eau et de savon doux. Ne jamais laisser
de liquide pénétrer dans l’outil et n’immerger aucune
partie de l’outil dans unliquide.
Réparations
Le chargeur et le bloc-piles ne sont pasréparables.
FRANÇAIS
14
AVERTISSEMENT : pour assurer la SÉCURITÉ et la
FIABILITÉ du produit, les réparations, l’entretien et
les réglages doivent être réalisés (cela comprend
l’inspection et le remplacement du balai, le cas
échéant) par un centre de réparation en usine
BLACK+DECKERou un centre de réparation agréé
BLACK+DECKER. Toujours utiliser des pièces de
rechangeidentiques.
Registre en ligne
Merci pour votre achat. Enregistrez dès maintenant
votreprodui:
RÉPARATIONS SOUS GARANTIE: cette carte remplie
vous permettra de vous prévaloir du service de
réparations sous garantie de façon plus efficace dans le
cas d’un probléme avec leproduit.
CONFIRMATION DE PROPRIÉTÉ: en cas de perte
provoquée par un incendie, une inondation ou un vol,
cette preuve de propriété vous servira de preuve auprès
de votre compagnie d’assurances.
SÉCURITÉ: l’enregistrement de votre produit
nous permettra de communiquer avec vous dans
l’éventualité peu probable de l’envoi d’un avis de
sécurité régi par la loi fédérale américaine de la
protection desconsommateurs.
Registre en ligne à www.blackanddecker.com/register.
Accessoires
Une gamme d’accessoires Mouse® est offerte et vendue
séparément. La gamme offerte peut varier selon le détaillant.
Remarque : utiliser uniquement le papier abrasif perforé
conforme au motif de la semelle de la ponceuse. Le papier
abrasif non perforé ne permettra pas l’aspiration de la
poussière dans le compartiment à poussière.
Le tampon en Velcromc et les socles individuels sont des
pièces remplaçables. Communiquer avec le centre de
service de la région lorsque ces pièces sont usées. Pour
obtenir de plus amples renseignements, composer le
numéro suivant : 1 (800) 544-6986.
AVERTISSEMENT : l’utilisation de tout accessoire non
recommandé pour l’outil peut être dangereuse.
MATRICE UTILISATION - ACCESSOIRE
ACCESSOIRE UTILISATIONS
RECOMMANDÉES
Papier abrasif de granulosité
moyenne
Papier abrasif de granulosité fine
Papier abrasif de granulosité
extrafine
Pointes abrasives de détail
Laine à polir ou à décaper 1OT
Laine à polir ou à décaper 4 OT
Tampon en caoutchouc mousse
gris
Tampon non tissé blanc
Tampon non tissé rouge
Enlèvement de peinture, vernis
et rouille
Finition des surfaces
Ponçage entre les couches de
peinture ou de vernis
Coins et endroits d’accès difficile
Polissage des métaux / décapage
de vernis ou d’uréthane
Polissage de finition sur
peinture,vernis ou uréthane
Enduit ou enlèvement de poli
Récurage léger
Récurage rigoureux / enlèvement
de la rouille
Garantie limitée de trois ans
BLACK+DECKERréparera, sans frais, tout produit défectueux
causé par un défaut de matériel ou de fabrication pour une
période de trois ans à compter de la date d’achat. La présente
garantie ne couvre pas les pièces dont la défectuosité a été
causée par une usure normale ou l’usage abusif de l’outil. Pour
obtenir de plus amples renseignements sur les pièces ou les
réparations couvertes par la présente garantie, visiter le site
www.blackanddecker.com ou composer le 1 800 433-9258
(1 800 4-BLACK+DECKER). Cette garantie ne s’applique pas
aux accessoires et ne vise pas les dommages causés par des
réparations effectuées par un tiers. Cette garantie confère des
droits légaux particuliers à l’acheteur, mais celui-ci pourrait
aussi bénéficier d’autres droits variant d’un état ou d’une
province à l’autre.
En plus de la présente garantie, les outils BLACK+DECKERsont
couverts par notre :
CONTRAT D’ENTRETIEN GRATUIT D’UNAN
BLACK+DECKERentretiendra l’outil et remplacera les pièces
usées au cours d’une utilisation normale et ce, gratuitement,
pendant une période d’un an à compter de la date d’achat.
GARANTIE DE REMBOURSEMENT DE90JOURS
Si l’acheteur n’est pas entièrement satisfait, pour quelque
raison que ce soit, du rendement de l’outil électrique, du laser
ou de la cloueuse BLACK+DECKER, celui-ci peut le retourner,
accompagné d’un reçu, dans les 90 jours à compter de la
date d’achat pour obtenir un remboursement intégral, sans
aucunproblème.
AMÉRIQUE LATINE : cette garantie ne s’applique aux produits
vendus en Amérique latine. Pour ceux-ci, veuillez consulter les
informations relatives à la garantie spécifique présente dans
l’emballage, appeler l’entreprise locale ou consulter le site Web
pour les informations relatives à cettegarantie.
REMPLACEMENT GRATUIT DES ÉTIQUETTES
D’AVERTISSEMENT : si les étiquettes d’avertissement
deviennent illisibles ou sont manquantes, composer le 1
800 433-9258 (1 800 4-BLACK+DECKER) pour en obtenir le
remplacementgratuit.
Imported by Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
1-800-544-6986
FRANÇAIS
15
Guide de dépannage
S’ASSURER DE SUIVRE TOUTES LES DIRECTIVES, Y COMPRIS LES CONSIGNES DE SÉCURITÉ
Pour de l’aide avec l’outil, consulter notre site Web www.blackanddecker.com pour l’emplacement du centre de réparation
le plus près ou communiquer avec l’assistance BLACK+DECKER au 1-800-544-6986.
PROBLÈME CAUSE POSSIBLE CAUSE POSSIBLE
L’appareil refuse de démarrer.. Cordon d’alimentation non branché.
Le fusible du circuit est grillé.
Le disjoncteur est déclenché.
Le cordon d’alimentation ou la prise de courant
est
Brancher l’outil dans une prise qui fonctionne.
Remplacer le fusible du circuit. grillé. (Si le
produit fait griller de façon répétée le fusible
du circuit, arrêter immédiatement d’utiliser le
produit et le faire réparer dans un centre de
réparation BLACK+DECKER ou un centre de
réparation autorisé.)
Remettre le disjoncteur à zéro . (Si le produit
fait déclencher de façon répétée le disjoncteur,
arrêter immédiatement d’utiliser le produit et
le faire réparer dans un centre de réparation
BLACK+DECKER ou un centre de réparation
autorisé.)
Séparer le compartiment àpoussière et le
secouer ou le tapoter délicatement pour le vider.
La poussière n’est pas aspirée. Les trous du papier abrasif ne sont pas alignés.
Le compartiment à poussière est plein.
Utiliser le papier abrasif Mouse® perforé selon le
motif approprié.
Séparer le compartiment à poussière et le
secouer ou le tapoter délicatement pour le vider.
ESPAÑOL
16
Español (traducido de las instrucciones originales)
¡ADVERTENCIA! Lea todas las advertencias de
seguridad e instrucciones. El incumplimiento
de las advertencias e instrucciones puede provocar
descargas eléctricas, incendios o lesionesgraves.
ADVERTENCIA: Para reducir el riesgo de lesiones, lea
el manual deinstrucciones.
Si tiene alguna duda o algún comentario sobre ésta u
otra herramienta BLACK+DECKER, llámenos al número
gratuito: 1–800–4-BLACK+DECKER((888) 848-5175).
1
Interruptor de encendido/apagado
2
Mango trasero
3
Mango delantero
4
Cartucho para recolección de polvo
5
Almohadilla de lijado
6
Punta de la almohadilla desmontable
7
Aditamento para detalles
Definiciones: Símbolos y palabras de alerta de seguridad
Este manual de instrucciones utiliza los siguientes símbolos y palabras de alerta de seguridad para alertarle de situaciones
peligrosas y del riesgo de lesiones corporales o daños materiales.
PELIGRO: Indica una situación de peligro inminente que, si no se evita, provocará la muerte o lesionesgraves.
ADVERTENCIA: Indica una situación de peligro potencial que, si no se evita, podría provocar la muerte o
lesionesgraves.
ATENCIÓN: Indica una situación de peligro potencial que, si no se evita, posiblemente provocaría lesiones leves
omoderadas.
(Utilizado sin palabras) indica un mensaje de seguridad relacionado.
AVISO: Se refiere a una práctica no relacionada a lesiones corporales que de no evitarse puede resultar en daños a
la propiedad.
Fig. A
13
6 5 4
2
7
ESPAÑOL
17
ADVERTENCIAS GENERALES DE SEGURIDAD
PARA HERRAMIENTAS ELÉCTRICAS
¡ADVERTENCIA! Lea todas las advertencias de
seguridad e instrucciones. El incumplimiento
de las advertencias e instrucciones puede provocar
descargas eléctricas, incendios o lesionesgraves.
CONSERVE TODAS LAS ADVERTENCIAS
E INSTRUCCIONES PARA FUTURAS
CONSULTAS
El término “herramienta eléctrica” incluido en las advertencias
hace referencia a las herramientas eléctricas operadas con
corriente (con cable eléctrico) o a las herramientas eléctricas
operadas con baterías (inalámbricas).
1) Seguridad en el Área de Trabajo
a ) Mantenga el área de trabajo limpia y bien
iluminada. Las áreas abarrotadas y oscuras
propicianaccidentes.
b ) No opere las herramientas eléctricas en
atmósferas explosivas, como ambientes donde
haya polvo, gases o líquidos inflamables. Las
herramientas eléctricas originan chispas que pueden
encender el polvo o losvapores.
c ) Mantenga alejados a los niños y a los
espectadores de la herramienta eléctrica en
funcionamiento. Las distracciones pueden provocar
la pérdida decontrol.
2) Seguridad Eléctrica
a ) Los enchufes de la herramienta eléctrica deben
adaptarse al tomacorriente. Nunca modifique el
enchufe de ninguna manera. No utilice ningún
enchufe adaptador con herramientas eléctricas
con conexión a tierra. Los enchufes no modificados
y que se adaptan a los tomacorrientes reducirán el
riesgo de descargaeléctrica.
b ) Evite el contacto corporal con superficies con
descargas a tierra como, por ejemplo, tuberías,
radiadores, cocinas eléctricas y refrigeradores.
Existe mayor riesgo de descarga eléctrica si su cuerpo
está puesto atierra.
c ) No exponga las herramientas eléctricas a la
lluvia o a condiciones de humedad. Si entra agua
a una herramienta eléctrica, aumentará el riesgo de
descargaeléctrica.
d ) No maltrate el cable. Nunca utilice el cable para
transportar, tirar o desenchufar la herramienta
eléctrica. Mantenga el cable alejado del calor, el
aceite, los bordes filosos y las piezas móviles. Los
cables dañados o enredados aumentan el riesgo de
descargaeléctrica.
e ) Al operar una herramienta eléctrica en el
exterior, utilice un cable prolongador adecuado
para tal uso. Utilice un cable adecuado para
uso en exteriores a fin de reducir el riesgo de
descargaeléctrica.
f ) Si el uso de una herramienta eléctrica en un
lugar húmedo es imposible de evitar, utilice
un suministro protegido con un interruptor de
circuito por falla a tierra (GFCI). El uso de un GFCI
reduce el riesgo de descargaseléctricas.
3) Seguridad Personal
a ) Permanezca alerta, controle lo que está
haciendo y utilice el sentido común cuando
emplee una herramienta eléctrica. No utilice
una herramienta eléctrica si está cansado o bajo
el efecto de drogas, alcohol o medicamentos.
Un momento de descuido mientras se opera una
herramienta eléctrica puede provocar lesiones
personalesgraves.
b ) Utilice equipos de protección personal. Siempre
utilice protección para los ojos. En las condiciones
adecuadas, el uso de equipos de protección,
como máscaras para polvo, calzado de seguridad
antideslizante, cascos o protección auditiva, reducirá
las lesionespersonales.
c ) Evite el encendido por accidente. Asegúrese de
que el interruptor esté en la posición de apagado
antes de conectarlo a la fuente de energía
o paquete de baterías, o antes de levantar
o transportar la herramienta. Transportar
herramientas eléctricas con el dedo apoyado en el
interruptor o enchufar herramientas eléctricas con
el interruptor en la posición de encendido puede
propiciaraccidentes.
d ) Retire la clavija de ajuste o la llave de tuercas
antes de encender la herramienta eléctrica. Una
llave de tuercas o una clavija de ajuste que quede
conectada a una pieza giratoria de la herramienta
eléctrica puede provocar lesionespersonales.
e ) No se estire. Conserve el equilibrio y párese
adecuadamente en todo momento. Esto permite
un mejor control de la herramienta eléctrica en
situacionesinesperadas.
f ) Use la vestimenta adecuada. No use ropas
holgadas ni joyas. Mantenga el cabello, la
ropa y los guantes alejados de las piezas en
movimiento. Las ropas holgadas, las joyas o el
cabello largo pueden quedar atrapados en las piezas
enmovimiento.
g ) Si se suministran dispositivos para la conexión
de accesorios con fines de recolección y
extracción de polvo, asegúrese de que estén
conectados y que se utilicen correctamente. El
uso de dispositivos de recolección de polvo puede
reducir los peligros relacionados con elpolvo.
4) Uso y Mantenimiento de la
Herramienta Eléctrica
a ) No fuerce la herramienta eléctrica. Utilice la
herramienta eléctrica correcta para el trabajo
que realizará. Si se la utiliza a la velocidad para la
que fue diseñada, la herramienta eléctrica correcta
permite trabajar mejor y de manera mássegura.
b ) No utilice la herramienta eléctrica si no puede
encenderla o apagarla con el interruptor. Toda
herramienta eléctrica que no pueda ser controlada
mediante el interruptor es peligrosa y deberepararse.
c ) Desconecte el enchufe de la fuente de energía
o el paquete de baterías de la herramienta
eléctrica antes de realizar ajustes, cambiar
accesorios o almacenar la herramienta eléctrica.
Estas medidas de seguridad preventivas reducen
ESPAÑOL
18
el riesgo de encender la herramienta eléctrica en
formaaccidental.
d ) Guarde la herramienta eléctrica que no esté en
uso fuera del alcance de los niños y no permita
que otras personas no familiarizadas con ella o
con estas instrucciones operen la herramienta.
Las herramientas eléctricas son peligrosas si son
operadas por usuarios nocapacitados.
e ) Realice el mantenimiento de las herramientas
eléctricas. Revise que no haya piezas en
movimiento mal alineadas o trabadas, piezas
rotas o cualquier otra situación que pueda
afectar el funcionamiento de la herramienta
eléctrica. Si encuentra daños, haga reparar
la herramienta eléctrica antes de utilizarla.
Se producen muchos accidentes a causa de
las herramientas eléctricas que carecen de un
mantenimientoadecuado.
f ) Mantenga las herramientas de corte afiladas
y limpias. Las herramientas de corte con
mantenimiento adecuado y con los bordes de corte
afilados son menos propensas a trabarse y son más
fáciles decontrolar.
g ) Utilice la herramienta eléctrica, los accesorios
y las brocas de la herramienta, etc. de acuerdo
con estas instrucciones y teniendo en cuenta
las condiciones de trabajo y el trabajo que debe
realizarse. El uso de la herramienta eléctrica para
operaciones diferentes de aquéllas para las que fue
diseñada podría originar una situaciónpeligrosa.
5) Mantenimiento
a ) Solicite a una persona calificada en reparaciones
que realice el mantenimiento de su herramienta
eléctrica y que sólo utilice piezas de repuesto
idénticas. Esto garantizará la seguridad de la
herramientaeléctrica.
ADVERTENCIAS E INSTRUCCIONES DE
SEGURIDAD: LIJADORAS
USE SIEMPRE PROTECCIÓN OCULAR.
Limpie su herramienta periódicamente.
OTRAS ADVERTENCIAS E INSTRUCCIONES
DE SEGURIDAD IMPORTANTES
Lijado de pintura a base de plomo
NO SE RECOMIENDA lijar pinturas a base de plomo
debido a la dificultad de controlar el polvo contaminado.
La intoxicación por plomo es más peligrosa para niños y
mujeres embarazadas.
Ya que es difícil identificar si una pintura contiene plomo
o no, sin antes hacer un análisis químico, recomendamos
que se tomen las siguientes precauciones al lijar cualquier
pintura:
SEGURIDAD PERSONAL
Ningún niño o mujer embarazada debería entrar al área
de trabajo donde se esté lijando pintura hasta que se
haya terminado de limpiar el área.
Todas las personas que entren en el área de trabajo
deben usar una mascarilla antipolvo o un respirador.
El filtro debería ser reemplazado a diario o cuando el
usuario tenga dificultades para respirar.
NOTA: Sólo se deberían utilizar aquellas mascarillas antipolvo
adecuadas para trabajar con polvo y gases de pinturas con
plomo. Las mascarillas regulares para pintar no ofrecen esta
protección. Visite su distribuidor de ferretería local para
obtener la mascarilla adecuada (aprobada por el NIOSH).
No se debe COMER, BEBER ni FUMAR en el área
de trabajo para evitar ingerir partículas de pintura
contaminada. Los trabajadores se deben lavar y limpiar
ANTES de comer, beber o fumar. No deben dejarse
artículos de comida, bebida o tabaco en el área de
trabajo donde se podría depositar polvo sobre ellos.
SEGURIDAD AMBIENTAL
La pintura debe ser retirada de manera que se reduzca
al mínimo la cantidad de polvo generado.
Las áreas donde se realiza remoción de pintura deben
estar selladas con láminas de plástico de 4 mm de grosor.
El lijado debería hacerse de modo que se reduzcan los
vestigios de polvo de pintura fuera del área de trabajo.
LIMPIEZA Y ELIMINACIÓN DE RESIDUOS
Todas las superficies del área de trabajo deben ser limpiadas
en profundidad y repasadas con aspiradora todos los días
mientras dure el proyecto de lijado. Las bolsas de filtro de la
aspiradora deben cambiarse con frecuencia.
Las láminas de protección de plástico deben recogerse
y eliminarse junto con el polvo y cualquier otro residuo.
Deberán colocarse en un recipiente para desechos
sellado y eliminarse de acuerdo con los procedimientos
normales de eliminación de la basura. Durante la
limpieza, se impedirá a niños y mujeres embarazadas el
acceso al área de trabajo.
Todos los juguetes, muebles lavables y utensilios usados por
niños deberán lavarse a fondo antes de volverlos a usar.
GUARDE ESTAS INSTRUCCIONES
Instrucción Adicional de Seguridad
ADVERTENCIA: Use SIEMPRE lentes de seguridad.
Los anteojos de diario NO SON lentes de seguridad.
Utilice además una cubrebocas o mascarilla antipolvo
si la operación de corte genera demasiado polvo.
SIEMPRE LLEVE EQUIPO DE SEGURIDADCERTIFICADO:
protección ocular ANSI Z87.1 (CAN/CSA Z94.3),
protección auditiva ANSI S12.6 (S3.19),
protección respiratoria NIOSH/OSHA/MSHA.
ADVERTENCIA: Algunas partículas de polvo
generadas al lijar, serrar, esmerilar y taladrar con
herramientas eléctricas, así como al realizar otras
actividades de construcción, contienen químicos que
el Estado de California sabe que pueden producir
cáncer, defectos congénitos u otras afecciones
reproductivas. Ejemplos de estos químicosson:
plomo de algunas pinturas en base a plomo,
polvo de sílice proveniente de ladrillos y cemento y
otros productos de albañilería, y
arsénico y cromo provenientes de madera
tratadaquímicamente.
Su riesgo de exposición a estos químicos varía, dependiendo
de la frecuencia con la cual realiza usted este tipo de trabajo.
Para reducir su exposición a estas sustancias químicas: trabaje
en una zona bien ventilada y llevando equipos de seguridad
aprobados, como mascarillas antipolvo especialmente
diseñadas para filtrar partículasmicroscópicas.
ESPAÑOL
19
Evite el contacto prolongado con polvo generado
por el lijado, aserrado, pulido, taladrado y otras
actividades de construcción. Vista ropas protectoras
y lave las áreas de la piel expuestas con agua y
jabón. Si permite que el polvo se introduzca en la boca u
ojos o quede sobre la piel, puede favorecer la absorción de
productos químicospeligrosos.
ADVERTENCIA: La utilización de esta herramienta
puede generar polvo o dispersarlo, lo que podría
causar daños graves y permanentes al sistema
respiratorio, así como otras lesiones. Siempre use
protección respiratoria aprobada por NIOSH (Instituto
Nacional de Seguridad y Salud en el Trabajo) u OSHA
(Administración de Seguridad y Salud en el Trabajo)
apropiada para la exposición al polvo. Dirija las
partículas en dirección contraria a la cara y elcuerpo.
ADVERTENCIA: Siempre lleve la debida
protección auditiva personal en conformidad
con ANSI S12.6 (S3.19) durante el uso de esta
herramienta. Bajo algunas condiciones y duraciones
de uso, el ruido producido por este producto puede
contribuir a la pérdidaauditiva.
ATENCIÓN: Cuando no esté en uso, guarde la
herramienta apoyada en un costado sobre una
superficie estable, donde no interrumpa el paso
o provoque una caída. Algunas herramientas
con paquetes de baterías de gran tamaño pueden
colocarse paradas sobre el paquete de baterías, pero
pueden caersefácilmente.
Los orificios de ventilación suelen cubrir piezas en
movimiento, por lo que también se deben evitar. Las
piezas en movimiento pueden atrapar prendas de vestir
sueltas, joyas o el cabellolargo.
Los hilos del alargador deben ser de un calibre
apropiado (AWG o American Wire Gauge) para
su seguridad. Mientras menor sea el calibre del hilo,
mayor la capacidad del cable. Es decir, un hilo calibre
16 tiene mayor capacidad que uno de 18. Un cable de
un calibre insuficiente causará una caída en la tensión
de la línea dando por resultado una pérdida de energía
y sobrecalentamiento. Cuando se utilice más de un
alargador para completar el largo total, asegúrese que
los hilos de cada alargador tengan el calibre mínimo.
La tabla siguiente muestra el tamaño correcto a utilizar,
dependiendo de la longitud del cable y del amperaje
nominal de la placa de identificación. Si tiene dudas sobre
cuál calibre usar, use un calibre mayor. Cuanto menor sea
el número del calibre, más resistente será elcable.
Calibre mínimo de conjuntos de cables
Voltios
Longitud total del cable en pies
(metros)
120 V 25 (7,6) 50 (15,2) 100 (30,5) 150 (45,7)
240 V 50 (15,2) 100 (30,5) 200 (61,0) 300 (91,4)
Amperaje
nominal
AWG
Más de
No más de
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
La etiqueta de su herramienta puede incluir los siguientes
símbolos. A continuación se indican los símbolos y
susdefiniciones:
V ......................... voltios
Hz ....................... hertz
min ..................... minutos
or DC ...... direct current
...................... Construcción de
Clase I (tierra)
…/min .............. por minuto
BPM .................... golpes por minuto
IPM ..................... impactos por
minuto
RPM .................... revoluciones por
minuto
sfpm ................... pies de superficie
por minuto
SPM .................... pasadas por
minuto
A ......................... amperios
W ........................ vatios
or AC ........... corriente alterna
or AC/DC .... corriente alterna
o directa
...................... Construcción de
Clase II (doble
aislamiento)
n
o
....................... velocidad sin carga
n ......................... velocidad nominal
...................... terminal de
conexión a tierra
...................... símbolo de
advertencia de
seguridad
..................... radiación visible
..................... protección
respiratoria
.....................protección ocular
.....................protección auditiva
..................... lea toda la
documentación
GUARDE ESTAS INSTRUCCIONES PARA
VOLVER A CONSULTAR EN EL FUTURO
Motor
Asegúrese de que la fuente de energía concuerde con
lo que se indica en la placa. Un descenso en el voltaje
de más del 10% producirá una pérdida de potencia y
sobrecalentamiento. Todas las herramientas
DeWALT
son probadas en fábrica; si esta herramienta no funciona,
verifique el suministro eléctrico.
COMPONENTES (FIG. A)
ADVERTENCIA: Nunca modifique la herramienta
eléctrica, ni tampoco ninguna de sus piezas. Podría
producir lesiones corporales odaños.
Consulte la Figura A al principio de este manual para
obtener una lista completa de loscomponentes.
USO DEBIDO
Su lijadora orbital aleatoria Black + Decker ha sido diseñada
para lijar madera, metal, plásticos y superficies pintadas. Este
producto está diseñado para uso doméstico, sólo para el
consumidor.
NO utilice la herramienta en condiciones de humedad o en
presencia de líquidos o gasesinflamables.
NO permita que los niños toquen la herramienta. Si el
operador no tiene experiencia operando esta herramienta,
su uso deberá sersupervisado.
MONTAJE Y AJUSTES
ADVERTENCIA: Para reducir el riesgo de lesiones
personales graves, apague la herramienta
y desconéctela de la fuente de alimentación
antes de realizar ajustes o de retirar/instalar

Black+Decker BDEMS600 Mouse Sander Instruction Manual Text

INSTRUCTION MANUAL
MODE D’EMPLOI
MANUAL DE INSTRUCCIONES

MOUSE SANDER
MOUSE PONCEUSE-POLISSEUSE
DE LIJARDORA MOUSE

BDEMS600
Please read before returning this product for any reason.
à LIRE avant de retourner ce produit pour quelque raison que ce soit.
LEA EL MANUAL antes de devolver este producto por cualquier motivo.

English
English (original instructions)

1

Français (traduction de la notice d’instructions originale)

8

Español (traducido de las instrucciones originales)

16

Thank you for choosing BLACK+DECKER!
If you have a question or experience a problem with your
BLACK+DECKER purchase, go to:
http://www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. – Fri. to speak
with an agent.
Please have the CATALOG NUMBER available when you call.

To register your new product, visit
www.BlackandDecker.com/NewOwner
Consulter le site Web www.BlackandDecker.com/NewOwner
pour enregistrer votre nouveau produit.
Visite www.BlackandDecker.com/NewOwner para registrar su
nuevo producto.

English

Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.






DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

Fig. A

3

1

7

2

6

1 On/off switch
2 Back handle
3 Front handle
4 Dust collection canister
5 Sanding pad
6 Removable pad tip
7 Finger attachment

5

4



WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.

1

English

GENERAL POWER TOOL SAFETY WARNINGS



WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.

SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless)
power tool.

1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c ) Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.

2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c ) Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d ) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e ) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f ) If operating a power tool in a damp location
is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.

3) Personal Safety
a ) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
2

b ) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c ) Prevent unintentional starting. Ensure the
switch is in the off position before connecting to
power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your
finger on the switch or energizing power tools that
have the switch on invites accidents.
d ) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e ) Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f ) Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
g ) If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.

4) Power Tool Use and Care
a ) Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
b ) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c ) Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d ) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
e ) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g ) Use the power tool, accessories and tool bits, etc.
in accordance with these instructions, taking

English
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardous situation.

5) Service
a ) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

SAFETY WARNINGS AND INSTRUCTIONS:
SANDERS




ALWAYS WEAR EYE PROTECTION.



Clean your tool out periodically.
CAUTION: Wear appropriate hearing protection
during use. Under some conditions and duration of
use, noise from this product may contribute to hearing
loss.

OTHER IMPORTANT SAFETY WARNINGS
AND INSTRUCTIONS
Sanding Lead based Paint
Sanding of lead based paint is NOT RECOMMENDED due
to the difficulty of controlling the contaminated dust.
The greatest danger of lead poisoning is to children and
pregnant women.
Since it is difficult to identify whether or not a paint contains
lead without a chemical analysis, we recommend the
following precautions when sanding any paint:

PERSONAL SAFETY


No children or pregnant women should enter the work
area where the paint sanding is being done until all
clean up is completed.
• A dust mask or respirator should be worn by all persons
entering the work area. The filter should be replaced
daily or whenever the wearer has difficulty breathing.
NOTE: Only those dust masks suitable for working with lead
paint dust and fumes should be used. Ordinary painting
masks do not offer this protection. See your local hardware
dealer for the proper (NIOSH approved) mask.
• NO EATING, DRINKING or SMOKING should be done in
the work area to prevent ingesting contaminated paint
particles. Workers should wash and clean up BEFORE
eating, drinking or smoking. Articles of food, drink, or
smoking should not be left in the work area where dust
would settle on them.

ENVIRONMENTAL SAFETY




Paint should be removed in such a manner as to
minimize the amount of dust generated.
Areas where paint removal is occurring should be sealed
with plastic sheeting of 4 mils thickness.
Sanding should be done in a manner to reduce tracking
of paint dust outside the work area.

CLEANING AND DISPOSAL






All surfaces in the work area should be vacuumed
and thoroughly cleaned daily for the duration of the
sanding project. Vacuum filter bags should be changed
frequently.
Plastic drop cloths should be gathered up and disposed
of along with any dust chips or other removal debris.
They should be placed in sealed refuse receptacles and
disposed of through regular trash pick-up procedures.
During clean up, children and pregnant women should
be kept away from the immediate work area.
All toys, washable furniture and utensils used by
children should be washed thoroughly before being
used again.

SAVE THESE INSTRUCTIONS
Additional Safety Information



WARNING: ALWAYS use safety glasses. Everyday
eyeglasses are NOT safety glasses. Also use face or
dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to the State
of California to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemicallytreated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
• Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling, and other
construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing
dust to get into your mouth, eyes, or lay on the skin may
promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/
or disperse dust, which may cause serious and
permanent respiratory or other injury. Always use
NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure. Direct particles
away from face and body.
WARNING: Always wear proper personal hearing
protection that conforms to ANSI S12.6 (S3.19)
during use. Under some conditions and duration
of use, noise from this product may contribute to
hearing loss.
3






English







CAUTION: When not in use, place tool on its side
on a stable surface where it will not cause a
tripping or falling hazard. Some tools with large
battery packs will stand upright on the battery pack
but may be easily knocked over.
Air vents often cover moving parts and should be
avoided. Loose clothes, jewelry or long hair can be
caught in moving parts.
An extension cord must have adequate wire size
(AWG or American Wire Gauge) for safety. The smaller
the gauge number of the wire, the greater the capacity
of the cable, that is, 16 gauge has more capacity than 18
gauge. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. When using
more than one extension to make up the total length,
be sure each individual extension contains at least the
minimum wire size. The following table shows the correct
size to use depending on cord length and nameplate
ampere rating. If in doubt, use the next heavier gauge. The
lower the gauge number, the heavier the cord.

Minimum Gauge for Cord Sets
Total Length of Cord in Feet
Volts
(meters)
120 V
25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)
240 V
50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)
Ampere Rating
More
Not
American Wire Gauge
Than More
Than
0
6
18
16
16
14
6
10
18
16
14
12
10
12
16
16
14
12
12
16
14
12
Not Recommended
The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V.......................... volts
or AC/DC..... alternating or
direct current
Hz........................ hertz
....................... Class II
min...................... minutes
Construction
or DC....... direct current
(double insulated)
....................... Class I Construction
no........................ no load speed
(grounded)
n.......................... rated speed
…/min............... per minute
....................... earthing terminal
BPM..................... beats per minute
...................... safety alert symbol
IPM...................... impacts per minute
...................... visible radiation
RPM..................... revolutions per
...................... wear respiratory
minute
protection
sfpm.................... surface feet per
...................... wear eye
minute
protection
SPM..................... strokes per minute
...................... wear hearing
A.......................... amperes
protection
W......................... watts
...................... read all
or AC............ alternating current
documentation

SAVE THESE INSTRUCTIONS FOR
FUTURE USE
4

Motor
Be sure your power supply agrees with the nameplate
marking. Voltage decrease of more than 10% will cause loss
of power and overheating. DeWALT tools are factory tested;
if this tool does not operate, check power supply.

COMPONENTS (FIG. A)



WARNING: Never modify the power tool or any part
of it. Damage or personal injury could result.
Refer to Figure A at the beginning of this manual for a
complete list of components.

INTENDED USE
Your BLACK+DECKER random orbital sander has been
designed for sanding wood, metal, plastics and painted
surfaces. This product is intended for household, consumer
use only.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.

OPERATION



WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
WARNING:To reduce the risk of serious personal
injury, read and follow all important safety warnings
and instructions prior to using this tool.





Proper Hand Position (Fig. B)
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury,
ALWAYS hold securely in anticipation of a sudden
reaction.
Proper hand position requires one hand on the main handle
3 as shown in Fig. B.
Fig. B

3

English

Switch (Fig. C, C1)

Finger Attachment (Fig. E)

To turn the tool ON, hold it as shown in Figure C or C1 and
push the on/off switch 1 toward the front of the tool. To
turn the tool OFF, pull the on/off switch back toward the
cord.
Fig. C

The finger attachment is used for fine detail sanding.
1. Remove the screw.
2. Remove the diamond-shaped pad tip 6 from the base.
3. Fit the finger attachment onto the sanding base as
shown in Fig. E.
4. Fit and tighten the screw.
5. Align the proper sanding sheet with the finger 7
attachment.
Fig. E
6

Fig. C1

1

Dust Extraction (Fig. F)
To Empty Dust Canister:

Operation
Grasp product as shown in Fig. C or C1 and turn it on. NOTE:
Do not rest fingers on platen during use. Move it in long
sweeping strokes across the surface, letting it do the work.
Light pressure is all that is required for sanding, polishing or
scrubbing. Excessive pressure will slow the tool and produce
inferior results. Check your work often, product is capable of
removing material rapidly.
WARNING: Shock hazard. Under no circumstances
should this product be used near water.
CAUTION: To reduce the risk of injury, turn off and
unplug the tool before making any adjustments or
removing or installing attachments or accessories.




Detail Sanding
Your tool is equipped with a teardrop base which allows
you to use it on large flat surfaces and tight spots or corners.
The pad tips may wear unevenly, depending on use.

Fitting sanding sheets (Fig. D)
1. Hold the tool with the sanding pad 5 facing upward.
2. Place the sanding sheet onto the sanding base, ensuring
all the holes of the paper line up with the holes in the
sanding pad as shown in Fig. D.
Fig. D

5




CAUTION: Respiratory hazard. Never operate this tool
for wood sanding unless the dust canister is in place.
Sanding dust exhaust may create a breathing hazard.
WARNING: Fire hazard. Collected sanding dust from
sanding surface coatings (polyurethane, linseed
oil, etc.) can self-ignite in sander dust canister or
elsewhere and cause fire. To reduce risk, empty
canister frequently and strictly follow sander manual
and coating manufacturer’s instructions.
WARNING: Fire hazard. When working on metal
surfaces, do not use the dust canister or a vacuum
cleaner because sparks are generated. Wear safety
glasses and a dust mask. Due to the danger of fire, do
not use your sander to sand magnesium surfaces. Do
not use for wet sanding.
The dust collection canister 4 should be emptied after every
10 minutes of sanding.
1. While holding the sander, grasp the dust collection
canister and pull it off of the sander as shown in Fig. F.
2. Hold the canister just inside a garbage can to ensure
dust is contained.
3. Push up on tab 8 to separate the top of the canister
from the bottom as shown in Fig. F.
Fig. F



8

4
4. Gently shake or tap the top and bottom of the canister
to empty.
5

English
5. Reattach the top and bottom and firmly push the canister
back onto the sander.

Hints for optimum use (Fig. G)









Do not place your hands over the ventilation slots.
Do not exert too much pressure on the tool.
Regularly check the condition of the sanding sheet.
Replace when necessary.
Always sand with the grain of the wood.
When sanding new layers of paint before applying
another layer, use extra fine grit.
On very uneven surfaces, or when removing layers of
paint, start with a coarse grit. On other surfaces, start with
a medium grit. In both cases, gradually change to a fine
grit for a smooth finish.
When sanding on a vertical surface, hold the back handle
2 for better grip and control as shown in Fig. G.
Fig. G

2

MAINTENANCE



WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.

Cleaning




WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.

Repairs
The charger and battery pack are not serviceable.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a BLACK+DECKER factory service
center or a BLACK+DECKER authorized service center.
Always use identical replacement parts.



6

Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• CONFIRMATION OF OWNERSHIP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.blackanddecker.com/register.

ACCESSORIES
A variety of Mouse® accessories are available at extra cost.
Listings per retailer may vary. Note: Use only sandpaper
with holes in the same configuration as on the base of the
sander. Sandpaper without holes will not allow dust to enter
the canister.
The hook and loop pad and individual bases are replaceable
parts. If they become worn, contact your local service
center. For more information call: 1-800-544-6986.
WARNING: The use of any accessory not
recommended for use with this appliance could
be hazardous.



APPLICATION / ACCESSORY MATRIX
ACCESSORY

RECOMMENDED
APPLICATIONS / USES

Paint, varnish, rust removal
Surface blending and finishing
Sanding between coats of paint
or varnish
Corners / hard to reach places
Detail sanding tips
Polishing metals / stripping
1 OT polishing / stripping wool
varnish or urethane
Fine polishing, satin finish on
4 OT fine polishing wool
paint / varnish / urethane
Applying and removing polish
Grey foam pad
Light scrubbing
White non-woven pad
Heavy scrubbing / rust removal
Red non-woven pad
The pads described above may be available in kits where
Mouse® products are sold. For more information call
1-800-544-6986.
Medium grit sandpaper
Fine grit sandpaper
Extra fine grit sandpaper

English

SERVICE INFORMATION
All BLACK+DECKER Service Centers are staffed
with trained personnel to provide customers with
efficient and reliable power tool service. Whether
you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER
location nearest you. To find your local service
location, call: 1-800-544-6986 or visit
www.blackanddecker.com

TWO-YEAR LIMITED WARRANTY
BLACK+DECKER warrants this product to be free from defects in
material or workmanship for a period of two 2 years following
the date of purchase, provided that the product is used in a
home environment. This limited warranty does not cover failures
due to abuse, accidental damage or when repairs have been
made or attempted by anyone other than BLACK+DECKER and
its Authorized Service Centers. A defective product meeting the
guarantee conditions set forth herein will be replaced or repaired
at no charge in either of two ways:
The first, which will result in exchanges only, is to return the
product to the retailer from whom it was purchased (provided
that the store is a participating retailer).Returns should be made
within the time period of the retailer’s policy for exchanges.
Proof of purchase may be required. Please check with the
retailer for its specific return policy regarding time limits for
returns or exchanges. The second option is to take or send the
product (prepaid) to a BLACK+DECKER owned or authorized
Service Center for repair or replacement at BLACK+DECKER’s
option. Proof of purchase may be required. BLACK+DECKER

owned and authorized service centers are listed online at www.
blackanddecker.com.
This warranty does not apply to accessories. This warranty
gives you specific legal rights and you may have other rights
which vary from state to state or province to province. Should
you have any questions, contact the manager of your nearest
BLACK+DECKER Service Center. This product is not intended for
commercial use, and accordingly, such commercial use of this
product will void this warranty. All other warranties, express or
implied, are hereby disclaimed.
LATIN AMERICA: This warranty does not apply to
products sold in Latin America. For products sold in Latin
America, check country specific warranty information
contained in the packaging, call the local company or see
the website for such information.
FREE WARNING LABEL REPLACEMENT: If your
warning labels become illegible or are missing, call 1-800-5446986 for a free replacement.
Imported by Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
1-800-544-6986

Troubleshooting Guide
BE SURE TO FOLLOW SAFETY RULES AND INSTRUCTIONS
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Unit will not start.

Cord not plugged in.
Circuit fuse is blown.

Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly
causes the circuit fuse to blow, discontinue
use immediately and have it serviced at a
BLACK+DECKER service center or authorized
servicer.)
Reset circuit breaker. (If the product repeatedly
causes the circuit breaker to trip, discontinue
use immediately and have it serviced at a
BLACK+DECKER service center or authorized
servicer.)
Have cord or switch replaced at BLACK+DECKER
Service Center or Authorized Servicer.

Circuit breaker is tripped.

Cord or switch is damaged.
Dust is not being collected.

Sandpaper holes do not align.
Dust canister is full.

Use Mouse® sandpaper with the appropriate hole
configuration.
Separate dust canister and gently shake or tap
to empty.


Black & Decker (U.S.) Inc.
701 East Joppa Road, Towson, MD 21286
Part No. N521820
BDEMS600
APRIL 2017
Copyright © 2017 BLACK+DECKER